I have a question, when entering the Dword, do I have to enter the number of the XP level I have? There they sent a link of the different numbers depending on the XP level you have or do I enter a range of 10000~20000 and then the number of XP depending on level? And do I also have to gain attribute points before modifying it for it to work?. It's just that since the house event is over, I'm already trying.You can put any number you want. I tend to stick with the lower numbers as I can always just change it later if the stat requirements get any higher, but any number below 399850 is fine as that is currently the maximum amount.
The first dword search that you do is your current total xp for the attribute. You can work that out exactly using the guide, or if you want you can just search for a range (use the ~ symbol between two numbers) and all the numbers between that will be a part of the search. For example, if I was part way through level 30 I could either search for 24910 + (my current xp for level 30 only) OR I could search for something like 23000~26880, which is the total xp between levels 29-31 which we know that our level 30 will be between.I have a question, when entering the Dword, do I have to enter the number of the XP level I have? There they sent a link of the different numbers depending on the XP level you have or do I enter a range of 10000~20000 and then the number of XP depending on level? And do I also have to gain attribute points before modifying it for it to work?. It's just that since the house event is over, I'm already trying.
Does this only work with the images you sent or also with the video?The first dword search that you do is your current total xp for the attribute. You can work that out exactly using the guide, or if you want you can just search for a range (use the ~ symbol between two numbers) and all the numbers between that will be a part of the search. For example, if I was part way through level 30 I could either search for 24910 + (my current xp for level 30 only) OR I could search for something like 23000~26880, which is the total xp between levels 29-31 which we know that our level 30 will be between.
The second search that you do is for the changed value. This is done after you have gained more attribute points after the first search. For example, if I was doing a lesson after the first search and got 15 attribute points I would then go to fuzzy search (magnifying glass), click "More", and then type 15 into "Difference:" and click "N=O+D". This will narrow the search down. Hopefully there will be only 3 search results by this point: If not, then repeat (i.e gain more attribute points and search the difference again.
Sorry to bother you again, but a video would be more helpful. If you find one, I would appreciate it.The first dword search that you do is your current total xp for the attribute. You can work that out exactly using the guide, or if you want you can just search for a range (use the ~ symbol between two numbers) and all the numbers between that will be a part of the search. For example, if I was part way through level 30 I could either search for 24910 + (my current xp for level 30 only) OR I could search for something like 23000~26880, which is the total xp between levels 29-31 which we know that our level 30 will be between.
The second search that you do is for the changed value. This is done after you have gained more attribute points after the first search. For example, if I was doing a lesson after the first search and got 15 attribute points I would then go to fuzzy search (magnifying glass), click "More", and then type 15 into "Difference:" and click "N=O+D". This will narrow the search down. Hopefully there will be only 3 search results by this point: If not, then repeat (i.e gain more attribute points and search the difference again.
Hi, what is the problem exactly bro, does the screen go black or what is really happening?View attachment 654387
I tried logging in with 5.2.2 following the steps but it won't let me connect to Facebook
I think we all really want that, especially thinking about the new people joining this and how more and more TLSQs are added and it's a little annoying to wait a day to get through one at a time.My next wish list is a mod to manually force TLSQ to trigger lol
The first dword search that you do is your current total xp for the attribute. You can work that out exactly using the guide, or if you want you can just search for a range (use the ~ symbol between two numbers) and all the numbers between that will be a part of the search. For example, if I was part way through level 30 I could either search for 24910 + (my current xp for level 30 only) OR I could search for something like 23000~26880, which is the total xp between levels 29-31 which we know that our level 30 will be between.
The second search that you do is for the changed value. This is done after you have gained more attribute points after the first search. For example, if I was doing a lesson after the first search and got 15 attribute points I would then go to fuzzy search (magnifying glass), click "More", and then type 15 into "Difference:" and click "N=O+D". This will narrow the search down. Hopefully there will be only 3 search results by this point: If not, then repeat (i.e gain more attribute points and search the difference again.
Since the fuzzy search crashed your game the first time, it's better to do a specific search instead.View attachment 654388
View attachment 654389
View attachment 654390
In this step, if I only put search, the game can close as you told me, but when you told me to put only the specific data, it doesn't work for me. Here I send you evidence, but I think I'm wrong. In the last image, if I put search, it appears that nothing was found.
Since the fuzzy search crashed your game the first time, it's better to do a specific search instead.
Looking at the screenshots, I'm guessing that you are searching in the memory range section, rather than the value section. This might be my mistake in the original guide for it not being clearer. I'll make a better guide whenever the back-to-back multiplayer events end. For now, I'll post a quick screenshot showing where to type until I can make something better.
View attachment 654392
I followed the steps in the images, but it didn't work out, so I wanted to see how to make it work. Another question, so step 2 of the original guide is no longer done, so how do I do step 3 in that case?Since the fuzzy search crashed your game the first time, it's better to do a specific search instead.
Looking at the screenshots, I'm guessing that you are searching in the memory range section, rather than the value section. This might be my mistake in the original guide for it not being clearer. I'll make a better guide whenever the back-to-back multiplayer events end. For now, I'll post a quick screenshot showing where to type until I can make something better.
View attachment 654392
I'm level 98 so mi xp between that level are 282360 and 292540 and I hit search and the data appears, when I want to do step 3 I earn points to raise the attributes and at the end I put the number 10 because that's what I win, as it is in the image of step 3 and I follow all the steps but in the end it does not find any data.That's for the first search (This replaces step 2. Fuzzy Dword search from the original guide).
Step 3 in the guide remains the same, it's just step 2 that we are changing as the game crashes if you search for all values (so we are searching exact OR for a range).I followed the steps in the images, but it didn't work out, so I wanted to see how to make it work. Another question, so step 2 of the original guide is no longer done, so how do I do step 3 in that case?
Just to be clear, that level 98 is your attribute value (empathy, courage, knowledge) and not your characters overall level? Because this search need to be for your attribute.I'm level 98 so mi xp between that level are 282360 and 292540 and I hit search and the data appears, when I want to do step 3 I earn points to raise the attributes and at the end I put the number 10 because that's what I win, as it is in the image of step 3 and I follow all the steps but in the end it does not find any data.
This will be easier to see in the video, and also when I remake the guide specifically for attributes, but what that means is that you only do step "3. Click arrow, select XOR...=???" for the value labled as "Encrypted Value" in step "4.Repeat until only 1-3 values remain".And in the last step, step 5, i don´t understand the number 5 that say "don´t click step 3 arrow"
We use cookies to personalize content and ads, to provide social media features and to analyse our traffic. We also share necessary information with our advertising and analytics partners to optimize your experience on our site.
Learn more about cookies
We use cookies to personalize content and ads, to provide social media features and to analyse our traffic. We also share necessary information with our advertising and analytics partners to optimize your experience on our site.
Learn more about cookies