Playstore Link:
Device Info HW+ - Apps on Google Play
Hardware and software information app for Android devices. PRO version.
It's PRO version of Device Info HW.
You can create a report with device infromation.
Tabs:
- General
Primary information about device hardware.
- SoC
Information about CPU and GPU.
- System
Information about android.
- Memory
Information about RAM, disk.
- Camera
Information about camera hardware and software characteristics.
- Battery
Experimental:
Charging / discharging speed.
Battery profile from kernel.
- Temperature
- Sensors
Information about sensors and tests for it. (Interacts with my app Sensor Test 1.2 and above)
- Partitions
Information about emmc partitions (for mtk, rockchip)
- Platform drivers
- Applications
List of installed applications. Support filtering apps.
Last item - open system apps.
- PMIC
Information about power regulator voltage.
- Net
Information about wi-fi connection.
- Input devices
List of input devices. On some devices available info about touchscreen model and sensors.
Features:
- Navigation panel
- You can go to other tab or menu by menu item.
- mtk: button for enter to engineer menu.
- Extra information about battery:
a) Charge / discharge speed.
For 5.0+ via Android API, for mtk special variant.
Discharging speed is current consumption. Ids = Ic
Charging speed is charge current - current consumption. Ics = Icc - Ic
b) Battery profile from kernel mtk, qcom (on some devices available model).
Information is only for reference. And it correct only for the factory battery.
Settings:
- Show i2c address
- Use root access
(It's need for detecting display on most devices; camera models on qcom; command line of the kernel)
Upload:
You can upload information about your device. It will be saved in database, available on web page: Device Info HW
You can see all tested devices there.
It available in menu Info-Center.
Supported platforms:
full: Mediatek, Rockchip
partialy: Qualcomm, Exynos, Intel and others
Note:
- Prefer detect active devices if possible (in kernel can be some different touchscreens, cameras...)
- Not for all devices can read drivers info, it's depend on soc, vendor. If you want help then upload your device info.
- On some devices with 7.0+ reading sysfs is disabled and primary info is unavailable. I'm researching for fix this.
If you found bugs or have interesting ideas, welcome to xda thread [APP][4.0.3+]Device Info HW
Reports:
Saving in html file format. See example:
Permissions :
- INTERNET permission is required for upload device information. (It's uses only when manual press upload button)
- CAMERA permission is required for getting camera characteristics. (< android 5.0)
- ACCESS_WIFI_STATE permission is required for wi-fi info.
What's New:
- Fixed root request
- Update
PRO
- Extra info about app
- CPU chart monitor
You can create a report with device infromation.
Tabs:
- General
Primary information about device hardware.
- SoC
Information about CPU and GPU.
- System
Information about android.
- Memory
Information about RAM, disk.
- Camera
Information about camera hardware and software characteristics.
- Battery
Experimental:
Charging / discharging speed.
Battery profile from kernel.
- Temperature
- Sensors
Information about sensors and tests for it. (Interacts with my app Sensor Test 1.2 and above)
- Partitions
Information about emmc partitions (for mtk, rockchip)
- Platform drivers
- Applications
List of installed applications. Support filtering apps.
Last item - open system apps.
- PMIC
Information about power regulator voltage.
- Net
Information about wi-fi connection.
- Input devices
List of input devices. On some devices available info about touchscreen model and sensors.
Features:
- Navigation panel
- You can go to other tab or menu by menu item.
- mtk: button for enter to engineer menu.
- Extra information about battery:
a) Charge / discharge speed.
For 5.0+ via Android API, for mtk special variant.
Discharging speed is current consumption. Ids = Ic
Charging speed is charge current - current consumption. Ics = Icc - Ic
b) Battery profile from kernel mtk, qcom (on some devices available model).
Information is only for reference. And it correct only for the factory battery.
Settings:
- Show i2c address
- Use root access
(It's need for detecting display on most devices; camera models on qcom; command line of the kernel)
Upload:
You can upload information about your device. It will be saved in database, available on web page: Device Info HW
You can see all tested devices there.
It available in menu Info-Center.
Supported platforms:
full: Mediatek, Rockchip
partialy: Qualcomm, Exynos, Intel and others
Note:
- Prefer detect active devices if possible (in kernel can be some different touchscreens, cameras...)
- Not for all devices can read drivers info, it's depend on soc, vendor. If you want help then upload your device info.
- On some devices with 7.0+ reading sysfs is disabled and primary info is unavailable. I'm researching for fix this.
If you found bugs or have interesting ideas, welcome to xda thread [APP][4.0.3+]Device Info HW
Reports:
Saving in html file format. See example:
Permissions :
- INTERNET permission is required for upload device information. (It's uses only when manual press upload button)
- CAMERA permission is required for getting camera characteristics. (< android 5.0)
- ACCESS_WIFI_STATE permission is required for wi-fi info.
What's New:
- Fixed root request
- Update
PRO
- Extra info about app
- CPU chart monitor
*Special Features*
No root or Lucky Patcher or Google Play Modded required;
Optimized and zipaligned graphics and cleaned resources for fast load;
Ads Permissions / Services / Providers removed from Android.manifest;
Debug code removed;
Remove default .source tags name of the corresponding java files;
Languages: Full Multi Languages;
CPUs: universal architecture;
Screen DPIs: 120dpi, 160dpi, 240dpi, 320dpi, 480dpi, 640dpi;
Original package signature changed;
Release by Balatan.
Free Download:
Hidden content
